제품에 대한 구입문의 또는 자세한 정보를 원하시는 분은 제품문의를 클릭하시고 내용을 입력해 주시면 빠른 시간 내에 답변드리도록 하겠습니다.

 

Equipment

Fully Automatic Dicing Saw

Maker

Disco

Model

DFD 2D/8

Status

Excellent

Location

In Factory

Application

Dicing/Cutting/Slotting various wafers

 

제목 없음
분류 항목 사양 단위
Workpiece size 200 x 200 (mm)

X-axis

Useable stroke 218 (mm)
Cut speed 0.13 ~ 300 (mm/s)
Y-axis Useable stroke 210 (mm)
Indexing step 0.0002 (mm)
Position accuracy (cumulative pitch) less than 0.005/160 (mm)
Position accuracy (single pitch) less than 0.003/5 (mm)
Scale resolution - (mm)
y-axis Useable stroke 11 (mm)
Indexing step 0.0002 (mm)
Position accuracy (cumulative pitch) less than 0.005/160 (mm)
Position accuracy (single pitch) less than 0.003/5 (mm)
Scale resolution - (mm)
Z1/2-axis Maximum cutting stroke 21.5 (for ø2"blade) * (mm)
Minimum step 0.0001 (mm)
Repeating accuracy 0.001 (mm)
Maximum blade size 76.2 (mm)
SP-axis Max revolution 3000 (min-1[rpm])
   Θ-axis Rotation angle (max.) 380 (deg)
Spindle Output 1.5 (kW)
Maximum revolution 40,000 (min-1[rpm])
Applicable Tape Frame MAX 2-6-1  
Utilities Power supply 3Phase 200V  
50-60Hz  
Power consumption
  When processing 1.5 (kW)
  During warm-up 1 (kW)
Maximum power 3.5 (kVA)
Air pressure(Not including Airgun) 0.5~0.6[5.0~6.0] (MPa[kgf/cm2])
Air flow rate(Not including Airgun) 162 (L/min(ANR))
Water pressure 0.3[3.0] (MPa[kgf/cm2])
Water flow rate
  Cutting water 0.4~6.0 (L/min)
  Cleaning water 2.5 (L/min)
Duct required suction 1.5 (m3/min)
Apperance Machine size 1,600W x 1,500D x 2000H (mm)
Machine weight 950 (kg)

*: ø2" = 55.56mm is assumed. A reference value only.

 


 

Dicing/Slicing Saws

Back-end & Assembly

Microscope & Metrology

Others

Wanted Used Equipment